Natural look

The Montana Textured slates have the most natural look, thanks to their dressed edges with a structured surface. This unique effect is achieved through a patented production process. SVK's Montana slates are highly breakage-resistant and extremely strong. Thanks to these properties, this slate is a top seller on the market!

Environmentally-friendly coating

A double coating of paint is applied to the visible side and the edges of the Montana slate, based on an environmentally friendly, water-based acrylic resin. One coloured layer is applied to the back and this is then followed with a colourless resin layer that resists water absorption. Due to the specific moss-resistant elements in our paint, moss formation basically has no chance.

Dimensionally consistent & quick installation

Montana Textured slates from SVK are dimensionally consistent in length, width and thickness. They do not require any prior sorting on thickness and can be installed straight away. This means huge time and cost savings.

Quality

SVK only uses the best raw materials to manufacture Montana slates. Because of the specially selected, high-quality fibres and thorough pressing, SVK's Montana roof slates are significantly stronger than the European standard (EN 492), which immediately explains their remarkably high durability.

Guarantee

SVK gives you a warranty on our Montana slates. The warranty statement can be obtained by simple request at: info@svk.be.

Thickness

4 mm

Available colours

Blue-black

Available sizes (cm)

60x30, 45x30, 40x27, 40x24, 45x30 (cut corners)

Quality standard

NBN-EN-492

Half round ridge

Dimension: 40x19/17cm

Weight: 1.42kg

Numberofunits/metre: 3.03

Roll-top ridge Type A

Dimension: 50x11cm

Weight: 1.82kg

Number of units/metre: 2.33

Roof slope: 30°, 45°

Plain angle ridge Type B

Dimension: 50x17cm

Weight: 2.00kg

Number of units/metre: 2.33

Roof slope: 10° up to 65°

Verge slate

Dimension: 11x19x40cm

Weight: 0.96kg

Number of units/metre: 3.5

Slate hook point driven/​drive hook (with or without hump) — Inox 17%

Material: Stainless steel 17%

Length/Diameter: 50/2.7 mm, 90/2.7 mm & 110/2.7 mm

Number of units: 196 units per kg , 142 units per kg, 130 units per kg

Min. order: 5 kg

Wrap hooks (with or without hump) — Inox 17%

Material: Stainless steel 17%

Length/Diameter: 50/2.7 mm, 90/2.7 mm & 110/2.7 mm

Min. order: 5 kg

Nails for slates

Material: Copper

Length/Diameter: 30/2.5mm ribbed

Number of units: 602 units per kg

Min. order: 5 kg

Ridge clips

Material: Copper

Number of units: 250 units per pack

Min. order: 250 units

Copper disc rivets

Material: Copper

Number of units: 1000 units per pack

Min. order: 1000 units