Body tinted

Colormat Classic facade panels are fully body-tinted and finished with impregnation. The fact that the panels are fully tinted means that the edges look the same as the front of the panels, creating a perfect appearance.

Optimal durability

Colormat façade panels give your façade a finish that withstands the test of time. Their durability is the result of careful selection of the very best raw materials. Impregnation protects the panels against water and dirt, and furthermore they are low maintenance.

Contemporary, natural look

Colormat façade panels are lightly sanded during production. This gives a fine line pattern on the visible side. Due to the matt protective layer, the ageing process occurs naturally.

Quality

Colormat conforms to the requirements of European standard EN 12467:2004 ‘Fibre-cement flat sheets – Product specification and test methods’ Each pack features a CE label with the relevant quality criteria.

Fire safety

Safety is one of the main priorities at SVK. The panels belong to fire reaction class A2-s1,d0 in accordance with European standard EN 13501-1 "Fire classification of materials, construction products and building elements". It also belongs to Class A ( 0/≤5) non combustible in accordance with ASTM E136 & ASTM E84. Specifically, this means that our facade panels can only make a limited contribution to fires, and they are tested under the strictest conditions. In the event of fire, there is only limited smoke development and no burning particles can fall from our plates. When designing a fire resistant wall or ceiling, the complete construction of the element must be taken into account, paying attention to the fire safety of the other materials used, including insulation, the mounting system and the interconnections between the materials.

Dimensions (squared)

Metric (mm):

Length x width: 3050 x 1220 mm or 2500 x 1220 mm

Thickness: 8 mm

Imperial (inches):

Length x width: 48 x 120 or 48 x 96

Thickness: 5/16

Physical properties (EN-12467& ASTMC1186)

Volume weight (kg/m³): (oven dried) 1600 ± 50 kg/m³

Metric Weight (kg/m²): ± 14.4

Imperial weight (lbs/sf): ± 3

Bending strength

Class: 5

Fire performance ( EN13501‑1, ASTME136& ASTME84)

Class: A2-s1, d0

Non-combustible

Class A (0/ ≤ 5)

Black EPDM joint tape 36 mm

Width: 36 mm

Minimum order quantity: 50 m/roll

Black EPDM joint tape 100 mm

Width: 100 mm

Minimum order quantity: 50 m/roll

Alu ventilation profiles

Dimensions: 50 x 30 mm

Minimum order quantity: 3 m/unit

Alu joint profile

Dimensions: 3.055 m/unit

Finishing: black anodised or other colours

Use: for vertical and horizontal use

Remark: This article is only available on order

Outer corner profile

Dimensions: 8.5 mm x 3055mm

Finishing: available in Alu anodised and colour

Minimumorderquantity: available per unit

Remark: This article is only available on order

Inner corner profile

Dimensions: 30 mm in corner 3000 mm

Finishing: available in Alu brut and colour

Minimum order quantity: available per unit

Remark: This article is only available on order

Torx colour screws for wooden applications

Dimensions: 4.5 x 38 mm Stainless steel A2

Minimum order quantity: 1 box (100 units)

In stock: standard colours

On order: Project colours

Torx colour screws for metal applications

Dimensions: 4.5 x 25 mm Stainless steel A2

Minimum order quantity: 1 box (250 units)

Remark: All colours always available on order

Tyvek UV façade foil

Dimensions: 50m x 1.5m

Minimum order quantity: 1 roll (suitable for 75m²)