Colormat Touch
The Colormat Touch facade panel has no line structure like the Classic and Scripto versions. The unique production process gives the panel a soft crepi look and feel. Currently available in three neutral colour tones.
Colormat Touch
The Colormat Touch facade panel is finished with a hydrophobic coating, which is a matt water-repellent transparent protective layer. It protects the panel against water and dirt. Thanks to this protective layer, the ageing process proceeds naturally.
Features
Coloured in the mass
Colormat Touch facade panels are fully mass-coloured and finished with a hydrophobic coating. Because the boards are mass-coloured, the edges have the same look as the visible side of the board for a perfect appearance.
Unique relief
Colormat Touch facade panels are deeply sanded during production. This creates a unique interplay of lines on the visible side, giving the façade more depth and character.
Optimal durability
Colormat Touch facade panels give your facade a finish that stands the test of time. They owe their durability to the use of the very best raw materials. The hydrophobic coating protects the panels against water and dirt, and they are also low-maintenance.
Quality
Colormat meets the requirements of European standard EN 12467:2004 'Fibre cement flat boards - Product specifications and test methods' A CE label with the relevant quality criteria is attached to each package.
Fire safety
Safety is one of the main priorities at SVK. The boards belong to fire reaction class A2-s1,d0 according to European standard EN 13501-1 "Fire classification of construction products and building components". In concrete terms, this means that our cladding boards can only make a very limited contribution to fire, tested under the most stringent conditions. In case of fire, there is only limited smoke development and no burning particles can fall down from our panels. When designing a fire-resistant wall or fire-resistant ceiling, one should also always consider the entire construction of the element and pay attention to the fire safety of the other materials used, such as insulation, the mounting system, the interconnections between the materials.
Technical information
Dimensions (edged)
Length x width: 3050 x 1220 mm or 2500 x 1220 mm
Thickness: 8 mm
Physical properties (EN12467)
Weightbyvolume (oven-dry): 1600 ± 50 kg/m³
Weightperm²: ± 14.4 kg
Bending strength (EN 12467)
Class: 5
Fire behaviour (EN13501 – 1)
Class: A2-s1, d0
Attachment materials
Black EPDM joint tape 36 mm
Width: 36 mm
Minimum order quantity: 50 m/roll
Black EPDM joint tape 100 mm
Width: 100 mm
Minimum order quantity: 50 m/roll
Alu ventilation profiles
Dimensions: 50 x 30 mm
Minimum order quantity: 3 m/unit
Alu joint profile
Dimensions: 3.055 m/unit
Finishing: black anodised or other colours
Use: for vertical and horizontal use
Remark: This article is only available on order
Outer corner profile
Dimensions: 8.5 mm x 3055mm
Finishing: available in Alu anodised and colour
Minimumorderquantity: available per unit
Remark: This article is only available on order
Inner corner profile
Dimensions: 30 mm in corner 3000 mm
Finishing: available in Alu brut and colour
Minimum order quantity: available per unit
Remark: This article is only available on order
Torx colour screws for wooden applications
Dimensions: 4.5 x 38 mm Stainless steel A2
Minimum order quantity: 1 box (100 units)
In stock: standard colours
On order: Project colours
Torx colour screws for metal applications
Dimensions: 4.5 x 25 mm Stainless steel A2
Minimum order quantity: 1 box (250 units)
Remark: All colours always available on order
Tyvek UV façade foil
Dimensions: 50m x 1.5m
Minimum order quantity: 1 roll (suitable for 75m²)
Installation techniques for wall cladding panels
SVK offers a range of techniques for the durable attachment of facade panels. Either a visible or concealed attachment is possible with the same panel thickness. Depending on the desired result you want to achieve, and that's unique.
How to install façade panels correctly
Exterior corner finishing - Installation of facade panels
The following video explains how to install an exterior corner with SVK fibre cement cladding panels. It also shows what to pay attention to during installation to avoid possible damage due to installation errors.
Roof edge finishing - Installation of facade panels
In this video we show how SVK fibre cement cladding panels should be mounted against a roof edge profile. The video shows how to do it and, above all, what not to do and what you should definitely bear in mind.
Window sill finishing - Installation of cladding panels
The video below shows how SVK fibre cement cladding panels should be correctly installed against a sill or, more specifically, a window sill. The video shows which rules to follow to avoid damage afterwards.
Underside of facade finishing - Installation of facade panels
The video explains how to correctly finish the underside of the façade with SVK fibre cement façade panels. It also gives a clear picture of what you should and should not do to ensure correct installation.
Interior corner finishing - Installation of facade panels
This video shows how to mount a fibre cement façade panel from SVK in an inside corner. It also gives you some tips and tricks to apply in order to mount it correctly.
Talk to an expert
Do you have any specific questions for which you can't find the answer straightaway? You can always contact our technical team, with no obligation. They will be delighted to help you with advice on our product specifications, installation and use of colours.
Realisations — Get Inspired
Rotterdam, Netherlands, Ornimat EST03 Cream
Halle, Belgium, Puro Plus
Dessel, Belgium, Colormat Classic H401 Jasmine
Educational rural centre "pajottenland", Gooik, Belgium, Ardonit Smooth Natural grey
