SVK Kempen 34 web
Facade panel with crepi look & feel

Colormat Touch

The Colormat Touch facade panel has no line structure like the Classic and Scripto versions. The unique production process gives the panel a soft crepi look and feel. Currently available in three neutral colour tones.

Colormat Touch

The Colormat Touch facade panel is finished with a hydrophobic coating, which is a matt water-repellent transparent protective layer. It protects the panel against water and dirt. Thanks to this protective layer, the ageing process proceeds naturally.

Colormat Touch - T405 Natural
Colormat Touch - T403 Storm
Colormat Touch - T402 Slate
Touch Natural
Touch Storm
Touch Slate
Colormat Touch

Features

Coloured in the mass

Colormat Touch facade panels are fully mass-coloured and finished with a hydrophobic coating. Because the boards are mass-coloured, the edges have the same look as the visible side of the board for a perfect appearance.

Unique relief

Colormat Touch facade panels are deeply sanded during production. This creates a unique interplay of lines on the visible side, giving the façade more depth and character.

Optimal durability

Colormat Touch facade panels give your facade a finish that stands the test of time. They owe their durability to the use of the very best raw materials. The hydrophobic coating protects the panels against water and dirt, and they are also low-maintenance.

Quality

Colormat meets the requirements of European standard EN 12467:2004 'Fibre cement flat boards - Product specifications and test methods' A CE label with the relevant quality criteria is attached to each package.

Fire safety

Safety is one of the main priorities at SVK. The boards belong to fire reaction class A2-s1,d0 according to European standard EN 13501-1 "Fire classification of construction products and building components". In concrete terms, this means that our cladding boards can only make a very limited contribution to fire, tested under the most stringent conditions. In case of fire, there is only limited smoke development and no burning particles can fall down from our panels. When designing a fire-resistant wall or fire-resistant ceiling, one should also always consider the entire construction of the element and pay attention to the fire safety of the other materials used, such as insulation, the mounting system, the interconnections between the materials.


More info

Technical information

Dimensions (edged)

Length x width: 3050 x 1220 mm or 2500 x 1220 mm

Thickness: 8 mm

Physical properties (EN12467)

Weightbyvolume (oven-dry): 1600 ± 50 kg/m³

Weightperm²: ± 14.4 kg

Bending strength (EN 12467)

Class: 5

Fire behaviour (EN13501 – 1)

Class: A2-s1, d0


Installation

Attachment materials

Mask Group 48

Black EPDM joint tape 36 mm

Width: 36 mm

Minimum order quantity
: 50 m/roll

Mask Group 49

Black EPDM joint tape 100 mm

Width: 100 mm

Minimum order quantity
: 50 m/roll

Mask Group 50

Alu ventilation profiles

Dimensions: 50 x 30 mm

Minimum order quantity: 3 m/unit

Mask Group 51

Alu joint profile

Dimensions: 3.055 m/unit

Finishing: black anodised or other colours

Use: for vertical and horizontal use

Remark: This article is only available on order

Mask Group 52

Outer corner profile

Dimensions: 8.5 mm x 3055mm

Finishing: available in Alu anodised and colour

Minimumorderquantity: available per unit

Remark: This article is only available on order

Schermafbeelding 2022 02 28 om 12 24 14

Inner corner profile

Dimensions: 30 mm in corner 3000 mm

Finishing: available in Alu brut and colour

Minimum order quantity: available per unit

Remark: This article is only available on order

Mask Group 53

Torx colour screws for wooden applications

Dimensions: 4.5 x 38 mm Stainless steel A2

Minimum order quantity: 1 box (100 units)

In stock: standard colours

On order: Project colours

Mask Group 54

Torx colour screws for metal applications

Dimensions: 4.5 x 25 mm Stainless steel A2

Minimum order quantity: 1 box (250 units)

Remark: All colours always available on order

Tyvek gevelfolie

Tyvek UV façade foil

Dimensions: 50m x 1.5m

Minimum order quantity: 1 roll (suitable for 75m²)


Installation guidelines

Installation techniques for wall cladding panels

SVK offers a range of techniques for the durable attachment of facade panels. Either a visible or concealed attachment is possible with the same panel thickness. Depending on the desired result you want to achieve, and that's unique.

Bevestigingstechnieken gevelplaten
Installation guidelines

How to install façade panels correctly

Exterior corner finishing
Double-click to see the video
Roof edge finishing
Double-click to see the video
Window sill finishing
Double-click to see the video
Underside of facade finishing
Double-click to see the video
Interior corner finishing
Double-click to see the video
About SVK

Talk to an expert

Do you have any specific questions for which you can't find the answer straightaway? You can always contact our technical team, with no obligation. They will be delighted to help you with advice on our product specifications, installation and use of colours.

Realisations — Get Inspired

Svk Rotterdam Cooltoren 22 web

Rotterdam, Netherlands, Ornimat EST03 Cream

ornimat
Svk halle 05

Halle, Belgium, Puro Plus

puro plus
Svk dessel 10

Dessel, Belgium, Colormat Classic H401 Jasmine

Colormat Classic
Svk gooik 16

Educational rural centre "pajottenland", Gooik, Belgium, Ardonit Smooth Natural grey

Ardonit Smooth
Svk amstelveen 029

Amstelveen, Netherlands, Colormat Scripto S402 Slate

Colormat Scripto

Slates

Aerial shot 3 of 16
Slates

Façade panels

Svk lobbes 041 web
Facade panels

Ontdek al onze producten